The fire extinguishing agent storage cylinder of the manifold type FM200 gas suppression system is usually placed in the special cylinder room and connected through the pipe network. When a fire occurs, the fire extinguishing agent will be conveyed from the cylinder to the protection area, and will be sprayed through the nozzle to extinguish the fire.
Check whether the configuration of the fire hydrant system is complete, including checking whether the static pressure of each fire hydrant meets the design or specification requirements
The inspection, test and maintenance of the gas fire suppression system is the guarantee to ensure the normal operation of the system when the fire occurs. Specific examples of 8 routine testing tasks.
Fire sprinkler system inspection testing and maintenance is the guarantee for sprinkler system to work normally, can greatly reduce the failure of fire extinguishing
Carbon monoxide is a dangerous, colorless, odorless gas. The air circulation in the basement and underground parking garage is bad, excessive concentration of harmful gases harm the human body. This article talks about carbon monoxide detector installation requirements and the maintenance of it.
Shipboard fire often happens. There are many reasons for it, such as circuit faults or aging wires in the engine room, cargo area, or crew living areas, causing electric fires. Or the crew members operating under the open flame, and littering cigarette butts, causing fires due to their negligence. Or, the ships didn't properly load the flammable and explosive dangerous cargo, leading to explosion fires. The above moves can seriously endanger the safety of the ship, cargo, and people. Therefore, installing a set of reliable fire alarm systems on the ship is rather important.
Standalone smoke detector doesn’t need wiring, uses battery power. It can be used in residence, cafe, hotel and so on, and is usually installed on the ceiling of the protected area. This article will introduce the features, working principle, application and notes of standalone smoke detector.
How to fill the gas fire extinguishing system?
1.FM-200 Cylinder Cleaning
2.FM-200 Gas Suppression System Cylinder Valve Assembly
3.FM-200 Cylinder Air Tightness Test
4.FM-200 Cylinder Group Vacuum Replacement
...