Manifold Type FM200 Gas Suppression System

Update time : 2023-06-01 15:33:21

The fire extinguishing agent storage cylinder of the manifold type FM200 gas suppression system is usually placed in the special cylinder room and connected through the pipe network. When a fire occurs, the fire extinguishing agent will be conveyed from the cylinder to the protection area, and will be sprayed through the nozzle to extinguish the fire.

What Consists in System

Manifold type FM200 gas suppression system consists: fire extinguishing cylinders, high-pressure hose, fire extinguishing agent check valve, startup gas cylinders, safety relief valve, selection valve, pressure signal device, nozzle, high-pressure pipeline, high-pressure pipe fittings, etc.

1. Fire extinguishing cylinders

The fire extinguishing cylinders includes fire extinguishing agent storage cylinder, flat head control valve, safety valve, manual valve, pressure gauge, and FM200 fire extinguishing agent. Storage cylinders can be divided into different models according to their volume.

2. High-pressure hose

The high-pressure hose connects the fire extinguishing cylinders and the extinguishing agent check valve.

3. Fire extinguishing agent check valve

The fire extinguishing agent check valve is installed between the high-pressure hose and the collector to prevent the gas from flowing backward.

4. Startup gas cylinders

Nitrogen is filled in the startup gas cylinders. When a fire occurs, the startup gas cylinders will open the selection valve and the cylinder head control valve to release the fire extinguishing agent when receiving a signal. The startup gas cylinders include gas storage cylinder, cylinder head control valve, electromagnetic starter, safety valve, manual valve, pressure gauge, and fire extinguishing gas.

5. Safety relief valve

The safety relief valve is used to prevent the overpressure of the system.

6. Selection valve

When a manifold type FM200 gas suppression system protects many protection zones, the selector valve will be used to control the fire extinguishing agent to enter the certain protection zone. According to the size of the pipe diameter, choose the right selection valve.

7. Pressure signal device

The pressure signal device reflects the extinguishing signal of the fire extinguishing agent.

8. Nozzles

For spraying fire extinguishing agent.

9. High-pressure pipeline

High-pressure pipes are used to transport fire extinguishing agents.

10. High-pressure pipe fittings

High-pressure fittings are used to connect high pressure pipelines.

Applications

Manifold type FM200 gas suppression system is suitable for data centers, libraries, archives, valuables warehouses, power stations (transformer rooms), telecommunication centers, clean workshops and other important places.

ASENWARE provides manifold type FM200 gas suppression system to meet the specific needs of customers, helping them to protect different places safely.

Previous : Cabinet Type FM200 Gas Suppression System

Next : How to fill the FM200 / hfc-227ea gas fire suppression system

The floods are merciless, Asenware has love - fighting floods with Bangladesh

Sep .12.2024

Flood merciless, but there is love in the world. When Asenware knew Bangladesh was in the midst of a flood disaster, On September 6th, Asenware, with the support of local partners, Four different Bangladeshi charities: As-Sunnah Foundation, trustful trading LTD, Bangladesh Red Crescent Society, Chief Advisor's Relief and Welfare Fund are donated by Asenware,

What is Fire Hose?

Oct .13.2023

A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested. If, during a fire emergency, the fire hose fails it could have disastrous results.

What is Water-proof Fire Alarm System?

Sep .15.2023

Waterproof Heat Detector
Fixed Temperature Waterproof Heat Detector, the detector uses a bi-metallic strip to sense temperature change, therefore consuming minimal standby current and providing high reliability.
The Detector is particularly suited to environments, which are exposed to high levels of condensation or are hosed down. The detector has a wide operating margin allowing it to respond to both slow and fast increases in temperature; it can also sense temperature reliably in a horizontal or vertical position.

Addressable Explosion-proof Fire Alarm System Introduction

Aug .08.2023

The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.

China-R&D and Supply Chain Center

Huoju District, Zhongshan City, Guangdong Province, China

Email us

[email protected]

Call us

0086 13922805301

About Us: About Us

Products: Fire Alarm System Emergency system Fire Suppression System Fire Fighting System

Contact Us

News: Company News Industry News Fire Alarm Devices Fire Alarm System Fire Detection Devices Fire Suppression System

Asenware email Asenware

Language

Language

Manifold Type FM200 Gas Suppression System